Adjustment tips for the operating menu
Selecting a channel – CHAN
Via the “CHAN” menu, you can switch between the channels in the channel banks “F” (fixed bank) or “U” (user bank). The channel bank “F“ has up to 16 switchable channels that are
The channel bank “U” also has up to 16 switchable channels to store frequencies that are freely selectable within the preset frequency range.
Always set the transmitter and the receiver of a transmission link to the same channel. After scanning the channel bank (see “Scanning the channel bank for free channels – SCAN” on page 25), only the free channels are displayed. Set the transmitter to one of the free channels.
Selecting the frequencies to be stored in the channel bank “U” – TUNE
Via the “TUNE” menu, you can freely select the frequencies to be stored in the channel bank “U” (user bank).
Press the SET button to get into the setting mode of the “TUNE” menu.
Note:
When pressing the SET button for one second, you can use the
/rocker button to select a different channel for which you can then change the frequency.
When you have selected the channel bank “F” and then select the “TUNE” menu, the receiver automatically switches to channel 01 of the channel bank “U”
Press the / rocker button to | select the desired receiving |
frequency. Receiving frequencies | are tunable in |
within a switching bandwidth of 36 MHz max.
24
