Stereo/FOCUS selection – ST-FOC
Via the “ST-FOC” menu, you can switch between stereo and FOCUS operation.
In both operating modes, the corresponding transmitter has to be set to stereo operation.
When the receiver is set to stereo operation, the left-right signals are available as usual.
When the receiver is set to FOCUS operation, the left-right signals are mixed and are available as a mono signal in both headphone channels. With the / rocker button you can adjust the relative levels of the two separate channels in the mixed mono signal (see “Adjusting the balance/FOCUS” on page 17).
Limitingthe volumeat the headphone output –
LTD
Via the “LTD” menu, you can switch the limiter on or off. With the limiter switched on, the volume at the headphone output will be reduced.
Activating/deactivating the frequency boost –
HI-BST
Via the “HI-BST” menu, you can boost the AF frequency response at 10 kHz by approx. 6 dB. As a result, headphones with magnetic transducers sound better.
