![](/images/new-backgrounds/1177484/17748435x1.webp)
Installing the handles
Take the handles out from the right side door.
REMOVING THE REFRIGERATOR DOORS
If your entrance won’t allow the refrigerator to pass easily through it, you can remove the refrigerator doors.
To remove the doors, follow the steps below. If you do not need to remove the doors, go to “Leveling the Refrigerator” on page 21.
The handles are included in the package. | Philips |
Screwdriver |
Screwdriver
10 mm Socket
Wrench
How to install the handles
Orient each handle so that the end with the sticker attached is at the top and the holes with the tightening screws are facing each other.
Then, follow the directions below to install each handle.
1. Remove the Front Leg Cover
Open both the freezer and refrigerator doors. Unscrew the three screws holding the front leg cover in place by turning them
L |
S |
( 2 ) |
( 1 )
( 3 )
Fix the handles to the doors by sliding them down firmly.
Front leg cover
Screw
( 4 ) |
| ( 5 ) |
| L | S |
|
|
English - 18
2014. 1. 28. |
�� 10:47