MAKING MINOR ADJUSTMENTS TO THE DOORS
A level refrigerator is necessary for getting the doors perfectly even.
Make sure your refrigerator is level before you begin.
If you need help leveling, review the previous section on leveling the refrigerator.
When the door of the freezer is higher than the fridge
Adjustment part
2.Adjust the height difference between the doors
by turning the bolt ( 2 ) clockwise ( 
) or
counter clockwise ( 
).
(3)Wrench
(2) Bolt
When you turn clockwise ( 
), the door will move up.
3.After adjusting the doors, turn the nut ( 1 )
clockwise ( 
) until it reaches the lower end of the bolt, then tighten the bolt again with the wrench ( 3 ) to fix the nut in place ( 1 ).
The process for adjusting each door is the same. Open the doors and adjust them, one at a time, as follows:
1.Unscrew the nut ( 1 ) from the lower hinge until it reaches the upper end of the bolt ( 2 ).
(3)Wrench
(2) Bolt
(1) Nut
When you release the nut ( 1 ), make sure that you use the hex wrench provided
( 3 ) to loosen the bolt ( 2 ) in a counter-
clockwise ( 
) direction.
You should then be able to unscrew the nut ( 1 ) with your fingers.
(3) Wrench
(2) Bolt
(1) Nut
If you do not secure the nut firmly, the bolt may release.
English - 22
2014. 1. 28. |
��
10:47
