SETTING UP THE

REFRIGERATOR DOORS

If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.

Removing the Front Leg Cover

First, open both the freezer and refrigerator doors, and then take off the front leg cover by turning the three screws counter-clockwise.

Removing the freezer door

A few things to mention fi rst.

•Make sure that you lift the door straight up so the hinges are not bent or broken.

•Be careful not to pinch the water tubing and wire harness on the door.

•Place doors on a protected surface to prevent scratching or damage.

1.With the Freezer door closed, remove the upper hinge cover 1 using a screwdriver, and then disconnect the wires by gently pulling them apart 2 .

2.Remove hinge bracket 3 and the ground screw 4 by turning counter-clockwise, and take off the upper hinge 5 . Be careful that the door does not fall on you as you are removing

it.

4 3

5

Be careful not to miss the parts of refrigerator.

3.Next, remove the door from the lower hinge 6 by carefully lifting the door straight up 7 .

7

6

4.Remove the lower hinge 8 from the bracket 9 by gently lifting the lower hinge upwards.

UP SETTING 01

1

9

2

Reattaching the freezer doors

To reattach the freezer doors, assemble parts in reverse order.

setting up _7

DA99-03327E (EN+FR+AR)-0.1.indb Sec4:7

 

 

2011.7.11 11:56:45 AM