Severe warning signs for transportation and site
WARNING
•When transporting and installing the appliance,care should be taken to ensure that no parts of the refrigerating circuit are damaged.
-Refrigerant leaking from the pipe work could ignite or cause an eye injury. If a leak is detected, avoid any naked flames or potential sources of ignition and air the room in which the appliance is standing for several minutes.
-This appliance contains a small amount of isobutane refrigerant
•When transporting and installing the refrigerator, do not touch the water hose on the back side of the refrigerator.
-This may damage the refrigerator and as a result the water dispenser can not be used.
information Safety
Critical installation warnings
WARNING
•Do not install the refrigerator in a damp location or place where it may come in contact with water.
-Deteriorated insulation on electrical parts may cause an electric shock or fire.
•Do not place this refrigerator in direct sunlight or expose it to the heat from stoves, room heaters, or other appliances.
•Do not plug several appliances into the same multiple power strip. The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the voltage listed on the refrigerator’s rating plate.
-This provides the best performance and also prevents overloading of house wiring circuits, which could cause a fire hazard from overheated wires.
•If the wall socket is loose, do not insert the power plug.
-There is a risk of electric shock of fire.
•Do not use a power cord that has cracks or abrasion damage along its length or at either end.
•Do not bend the power cord excessively or place heavy objects on it.
•Do not pull or excessively bend the power cord.
•Do not twist or tie the power cord.
English 5
|
| 7/17/2017 4:54:36 PM | |
|
| ||
|
|
|
|