Operations

Operations

To fill the water tank

For first-time use, clean the inner side of the water tank and dry well.

1. Hold both handgrips on the front of the tank, and slide out as shown.

2. Open the front lid (A) of the cover or the entire cover (B) and fill the tank with a max of 5 liters water.

CAUTION

Do not exceed the max line. Water overflows.

AB

3. Reinsert the water tank and fit into the dispenser mechanism. Make sure the front side (with the front lid) of the tank faces to the front.

CAUTION

•Make sure the water tank fits into the shelf. Otherwise, the water tank may not operate properly.

•Do not use the refrigerator without inserting the water tank. This may decrease the cooling performance.

•Fill the tank only with potable water such as mineral or purified water. Do not use other liquid.

•Use caution when moving a filled tank. Physical injury may occur if the tank is dropped.

•Do not try to disassemble the internal pump yourself. If the internal pump is damaged or disconnected from the water tank, the dispenser does not operate.

For first-time use

•Push the dispenser lever for 10 seconds to emit air from the hoses of the water supply system.

•Discard the first six glasses of water to remove impurities in the water supply system.

46  English

Untitled-28 46

 

 

7/17/2017 4:54:51 PM