WARRANTY INFORMATION

This water line installation is not covered by the refrigerator or ice maker manufacturer’s warranty. Follow these instructions carefully to minimise the risk of expensive water damage.

Note:

If the coupler does not fi t on the current tap, go

the nearest authorised service dealer and purchase the right couplers fi ttings.

select the location where the purifier is to install. (Model with the purifier)

-If you wish to reassemble the water inlet and outlet sides of the purifi er during purifi er installation, see the reference illustration.

-Cut the water line attached to the purifi er to the appropriate place after measuring the distance between the purifi er and the cold water tap.

COUPLER “A”

 

 

TAP

 

LINE OUTLET

SIDE OF

90 degree

PURIFIER

 

CAUTION

 

 

PURIFIER WATER

Insert Locking Clip After

tube seated

 

 

WATER INLET

COUPLER

Locking Clip

SIDE OF PURIFIER

 

 

 

Replacement Instructions

1.Shut off water supply.

2.Note the Flow direction on the fi lter.

3.Insert water supply tube into the inlet side of the fi lter until the tube stop.

 

FLOW DIRECTION

WATER SUPPLY

PERMEAT

INLET SIDE

 

Note : You must also ensure that the cut is square and not at any sort of angle as this could cause a leak

14_ setting up

4.After inserting tube, put together the clip strongly. The Clip fi x the tube.

5.Turn on the water and check for leaks. If leaks occur, repeat step 1,2,3,4. If leaks persist, discontinue use and call your supporting dealer.

6.Flush fi lter for 5 minutes before use.

Remove any residual matter inside the purifier. (Model with the purifier)

-Open the main water tap to check whether water is running through the water tube on the water inlet side of the purifi er.

-If water does not come out through the line, check whether the tap is open.

-Leave the tap open until clean water is running out and any residual matter that built up during manufacturing has been removed.

OUTLET SIDE

PURIFIER

OF PURIFIER

WATER

WATER LINE

 

Attach the purifier lock-clip.

-Hold the purifi er lock-clip in the appropriate position (under the sink for example) and fi x it tightly into place where to screw.

PURIFIER LOCK-CLIP

Secure the purifier in position.

-Fix the purifi er in position, as shown in the fi gure on the right.

WATER TUBE

PURIFIER LOCK-CLIP

PURIFIER

DA99-02291Q.indb Sec4:14

2011.7.14 9:53:3 AM

Page 14
Image 14
Samsung RSH7UNBP1/XEO manual Replacement Instructions, Attach the purifier lock-clip, Secure the purifier in position