Samsung RSH7UNBP1/XEO manual Reattaching, Refrigerator Doors, Removing the Fridge Door

Removing the Fridge Door	REATTACHING THE
1. With the door closed, remove the upper hinge	REFRIGERATOR DOORS
cover 1 using a screwdriver.	Once you have safely placed your refrigerator where
	you plan for it to stay, it is time to put the doors back
1	on.
	Reattaching the Freezer Door
	1. Replace the freezer door by inserting the water
	line 1 back into the lower corner of the door and
	then into the hole on the lower hinge 2 .
	Gently pull the water line back down so that it runs
2. Remove hinge screws 2 and the ground screw	straight, with no kinks or bends.

3by turning counter-clockwise, and take off the upper hinge 4 . Be careful that the door does not

	fall on you as you are removing it	1
2		2

3

4

		2. Insert the upper hinge shaft 3	into the hole on
		the corner of the freezer door	4 .
3. Remove the door from the lower hinge	5 by	Make sure the hinge is level between the upper
		hinge hole 5 and the hole of the cabinet 6 and
lifting the door straight up 6 .
		reattach the hinge screws 7	and ground screw
		8 by turning in a clockwise direction.
		Reconnect the wires.
		8
		7

01 SETTING UP

4. Remove the lower hinge 7 from the bracket 8	5
by gently lifting the lower hinge upwards.	6

3

4

3.Place the front part of the upper hinge cover 9 on the front of the upper hinge 10 and reattach with the screw.

10

9

setting up _9

DA99-02291Q.indb Sec4:9 2011.7.14 9:52:51 AM