Video Wall
→ Video Wall → E
Video Wall
––The displayed image may differ depending on the model.
––For the supported resolutions, refer to the
Standard Signal Modes table on page 94.
––The Video Wall function is not supported when Picture → LED Picture Size → Output Resolution is set to FHD.
Customize the layout of multiple
In addition, display part of a whole picture or repeat the same picture on each of the connected multiple
To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the MagicInfo function.
Video Wall
You can activate or deactivate Video Wall.
When using multiple
•• Off / On
Horizontal x Vertical
This feature automatically splits a display based on a videowall matrix configuration. Enter the videowall matrix.
The display is split based on the configured matrix. The number of vertical or horizontal
――A display can be split into a maximum of 100 screens.
――The Horizontal x Vertical option is only enabled when Video Wall is set to On.
Screen Position
To rearrange split screens, adjust the number for each product in the matrix using the Screen Position feature.
Selecting Screen Position will display the videowall matrix with the numbers assigned to the products that form the videowall.
To rearrange products, use the direction buttons on the remote control to move a product to another desired number. Press the Ebutton.
――Screen Position allows you to split the screen into a maximum of 100 views (15x15). The maximum number of views that can be split when products are connected via DP Loopout is also 100.
――The Screen Position option is only enabled when Video Wall is set to On. ――To use the function, make sure Horizontal x Vertical is configured.
47