Samsung SNOW-1703U Automatic Open Network Settings, Manual Open Network Settings, How to set up automatically, Getting the Network Connection Values, How to set up manually

Set the network connection to use Internet services such as perform software upgrades.

Automatic Open Network Settings

Connect to the network using a LAN cable.

Make sure a LAN cable is connected first.

How to set up automatically

1	Select Open Network Settings. The Open Network Settings session starts.
2	The network test screen appears and verifies the network connection.

When the connection has been verified, the “Your TV is connected to the Internet. If you have any problems using online services, please contact your internet service provider.” message appears.

――If the connection process fails, check the LAN port connection.

――If the automatic process cannot find the network connection values or if you want to set the connection manually, go to the next section, network setup.

Manual Open Network Settings

Offices may use static IP addresses.

If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server address. Enter these values manually.

Getting the Network Connection Values

To view the Network connection values on most Windows computers, follow these steps.

1	Right click the Network icon on the bottom right of the screen.
2	In the pop-up menu that appears, click Status.
3	On the dialog that appears, click the Support tab.
4	On the Support Tab, click the Details button. The Network connection values are
	displayed.

How to set up manually

1	Select Open Network Settings. The Open Network Settings session starts.
2	The network test screen appears and the verification process starts. Press Stop. The
	verification process stops.
3	Select IP Settings on network connection screen. The IP Settings screen appears.
4	Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat
	the entry process for each field in the IP Address.
	――Setting IP Settings to Enter manually automatically changes DNS Setting to Enter
	manually.
5	When done, select OK at the bottom of the page, and then press E. The network test
	screen appears and the verification process starts.
6	When the connection has been verified, the “Your TV is connected to the Internet. If you
	have any problems using online services, please contact your internet service provider.”

message appears.

67