ENGLISH
Preparation
Using the Lithium Ion Battery Pack
✤ | The amount of continuous recording time available depends on : | ✤ |
| - The type and capacity of the battery pack you are using. | - |
| - How often the Zoom function is used. | - |
| It is recommended that you have several batteries available. |
|
Charging the Lithium Ion Battery Pack |
| |
1. | Attach the battery pack to the camcorder. |
|
2. | Connect the AC Power adapter to an AC cord |
|
| and connect the AC cord to a wall socket. |
|
3. | Connect the DC cable to the DC jack socket |
|
| on the camcorder. |
|
4. | Turn the Camera power switch to off, and the |
|
| charging indicator will start to flash, showing |
|
| that the battery is charging. |
|
1.
2.
3.
4.
Blinking time | Charging rate |
|
|
Once per second | Less than 50% |
|
|
Twice per second | 50% ~ 75% |
Three times per second | 75% ~ 90% |
Blinking stops and stays on | 90 ~ 100% |
On for a second and | Error - Reset the battery pack and |
off for a second | the DC cable |
50%
50% ~ 75%
75% ~ 90%
90 ~ 100%
5. When the battery is fully charged, disconnect the battery
pack and the AC Power adapter from the camcorder.
5
5.
■ 
■ Even with the power switched off, the battery pack will still discharge if it is left connected to the camcorder.
Reference
■The battery pack may be charged a little at the time of purchase.
■To prevent reduction in the life and capacity of the battery pack, always remove it from the camcorder after it is fully charged.
24
■
■
