ENGLISH

Basic Recording

Adjusting the LCD during PLAY

 

 

You can adjust the LCD during playback.

The adjustment method is the same procedure as used in

CAMERA mode. (see page 31)

Controlling Sound from the Speaker

The Speaker works in PLAYER mode only.

When you use the LCD screen for playback, you can hear the recorded sound from he built-in Speaker.

-Follow the instructions below to decrease or mute speaker volume in the PLAYER mode.

-Take the following steps to lower the volume or mute the sound while playing a tape on the camcorder.

1.Set the power switch to PLAYER mode.

2.Press (PLAY/STILL) to play the tape.

3.When you hear sounds once the tape is in play, use the MENU DIAL to adjust the volume.

A volume level display will appear on the LCD. Levels may be adjusted from anywhere between 00 to 19 and you will not hear any sound when the volume is set on 00.

If you close the LCD while playing, you will not hear sound from the speaker.

Reference

When the cable is connected to the A/V jack, you cannot hear sound from the camcorder speaker and

cannot adjust the volume.

You can hear sound from camcorder speaker by removing the connected cable from the A/V jack

-

-

1.

2.

3.

 

 

VOL / MF

<3-2>

 

 

 

 

 

0 : 2 3 : 4 7

 

 

5 5 min

 

 

VOL.

[ 1 1 ]

1 0 : 0 0 AM

 

 

 

 

J A N . 1 0 , 2 0 0 3

34

Page 34
Image 34
Samsung SC-D23 manual Controlling Sound from the Speaker