Introduction

￿Input/Output Connector

This connector has input and output ports for RS-485 control signals, DAY/NIGHT switching, and alarm output signals.

No.

Function

Description

1

ALARM OUT

Alarm out port for motion detection. (Open collector type)

2

GND

Grounding Port.

3

TRIGGER IN

Displays the current still image when it receives the Trigger signal.

(Normal Open Type)

 

 

4

SHUTTER (S0)

This is a port for selecting an external high speed shutter mode.

If connected in LOW (0V), it will become ON inside.

 

 

5

SHUTTER (S1)

This is a port for selecting an external high speed shutter mode.

If connected in LOW (0V), it will become ON inside.

 

 

6

SHUTTER (S2)

This is a port for selecting an external high speed shutter mode.

If connected in LOW (0V), it will become ON inside.

 

 

7

5V OUT

Power supply port for RS-485 JIG. Use within typical DC +5V 100mA

 

 

 

 

 

This is a port for DAY&NIGHT conversion.

8

DAY/NIGHT IN

High(DC +3V~+5V) : DAY(COLOR) Mode,

 

 

Low(0V) : NIGHT(BW) Mode

9

RS-485 DATA-

This is a port for connection to RS-485 DATA- signal line.

 

 

 

10

RS-485 DATA+

This is a port for connection to RS-485 DATA+ signal line.

 

 

 

￿SETUP Switch

This switch is used to set the function or property. When this switch is pressed for at least 2 seconds, the MAIN MENU appears.

￿￿(Left/Right) : By pressing this switch left or right, you can move left or right on the menu or change the displayed value.

￿￿(Up/Down) : By pressing this switch up or down, you can move up or down on the menu.

￿: When you press this switch in the menu, the selected function is confirmed. To enter a submenu, press this button.

￿Power Display LED

When the power is normally connected, the red LED lights.

￿Video OUT Port

This is connected to the Video Input Port of the monitor and it outputs the Video signals.

￿GND

This is a grounding port.

￿Power Connection Port

This is connected to the Power cable.

10 – DIGITAL COLOR CAMERA