How to use OSD Menu
This enables an auto switch between DAY and NIGHT mode using the interface with the external sensor.
| ❖ WHITE BAL | [DAY/NIGHT] |
If you want to adjust the color scheme, use the WHITE BALANCE function.
•DAY
In DAY mode, you can set the color values of RED and BLUE. The screen will be displayed in colors according to your settings.
WHITE BAL
DAY/NIGHT |
|
|
| DAY | |
MODE |
|
|
| AWC | |
RED | |||||
BLUE | |||||
| [0248] |
|
| ||
|
|
| |||
| [0247] |
|
| ||
|
| ||||
Note :
–You can set the values of•NIGHT
Use the NIGHT mode if you want to set the white balance differently according to the ambient luminance.
If the NIGHT mode is set to OFF, the white balance will always operate as set in DAY mode; if not to OFF, the camera will switch to as set in DAY/NIGHT mode according to the brightness.
In NIGHT mode, you can set the values of RED, BLUE and BRIGHTNESS. The screen will be displayed in colors according to your settings.
| WHITE BAL |
|
|
| |
DAY/NIGHT |
| NIGHT | |||
BRIGHTNESS |
|
| MID | ||
MODE |
|
| AWC | ||
RED | |||||
BLUE | |||||
[0248] |
|
|
| ||
|
|
| |||
[0247] |
|
|
| ||
| |||||
Note :
–You can set the values of
–For adjusting the white balance, the following
5 modes are provided:•ATW1(Auto Tracing White Balance mode 1): The camera can automatically adjust the color temperature in real time, according to the ambient conditions. The color temperature ranges from approx. 2500K to 9300K.
•ATW2: The color temperature ranges from approx. 2,000K to 10,000K.
•AWC ( Auto White Balance Control): If you press the SETUP switch in the appropriate item position, Auto White Balance will perform once.
•3200K : Set color temperature to 3200K•5600K : Set color temperature to 5600K–RED : Adjusts the strength of the red color.–BLUE : Adjusts the strength of the blue color.
––BRIGHTNESS : Select a brightness level in switching from setting in DAY mode to setting in NIGHT mode.
ENG
English – 21