How to use OSD Menu

mode. When it gets brighter back, the mode will switch to the fixed high speed electronic shutter mode.

However, the auto high speed shutter operates properly only in a camera featuring a DC or VIDEO lens.

In external high speed electronic shutter (EXT) mode, you can select one of 8 modes from OFF through 1/100(PAL:1/120) to 1/10K for the high speed electronic shutter. It works as the high speed electronic shutter. You can select an option using SHUTTER(S0), SHUTTER(S1) and SHUTTER(S2) on the rear.

Connect each of the terminals to GND.See the below table for the operation.

 

SHUTTER(S0)

SHUTTER(S1)

SHUTTER(S2)

OFF

 

 

 

(NTSC: 1/60,

OFF

OFF

OFF

PAL:1/50)

 

 

 

1/100

ON

OFF

OFF

(PAL:1/120)

 

 

 

1/250

OFF

ON

OFF

 

 

 

 

1/500

ON

ON

OFF

 

 

 

 

1/1000

OFF

OFF

ON

 

 

 

 

1/2000

ON

OFF

ON

 

 

 

 

1/4000

OFF

ON

ON

 

 

 

 

1/10K

ON

ON

ON

 

 

 

 

Note :

–If IRIS mode is set to ELC, the SHUTTER menu will be deactivated as you adjust the brightness using the electronic shutter.

–If the SENS-UP function is set to AUTO, only items of OFF and AUTO are available in the SHUTTER menu.

–If the SENS-UP mode is set to FIX, the SHUTTER menu will be deactivated.

–If the FLICKERLESS function is set to ON, the SHUTTER menu will be deactivated.

❖SENS-UP

[OFF, AUTO X2, AUTO X4, AUTO X6, AUTO X8, AUTO X12, AUTO X16, AUTO X24, AUTO X32, AUTO X48, AUTO X64, AUTO X96, AUTO X128, AUTO X256, AUTO X512, FIX X2, FIX X4, FIX X6, FIX X8, FIX X12, FIX X16, FIX X24, FIX X32, FIX X48, FIX X64, FIX X96, FIX X128, FIX X256, FIX X512]

Automatically detects the ambient level of darkness in the dark or low contrast scene to extend the accumulated time, keeping the image bright and sharp; It can be also used as FIX mode.

Note :

–If the SHUTTER option is set to fixed electronic shutter or EXT mode, the SENS-UP menu will be deactivated.

–If FLICKERLESS is set to ON, the FIX mode of the SENS- UP menu will be disabled.

–If the IRIS menu is set to ELC, the electronic shutter will control the brightness so the SENS-UP function can not be set to FIX mode, but to OFF or AUTO mode.

–If the SHUTTER menu is set to AUTO, the SENS-UP menu can be set to either OFF or AUTO mode.

–If the BACKLIGHT function is set to WDR, the SENS-UP menu can not be set to FIX.

❖ FLICKERLESS

[OFF, ON]

If set to ON, the shutter speed will be fixed to 1/100(PAL:1/120) second. This will prevent possible screen distortion due to a mismatch between the vertical sync frequency and the blinking frequency of the lighting.

Note :

–If the IRIS function is set to ELC, the Flickerless menu will be deactivated. If the SHUTTER menu is set to AUTO, FIX or EXT mode, the Flickerless menu will be deactivated.

–If the SENS-UP function is set to FIX mode, the Flickerless menu will be deactivated.

–If AGC is set to FIX mode, the FLICKERLESS function will be disabled.

ENG

English – 19