How to use OSD Menu

OTHER SET

￿OTHER SET￿

 

EXTERNAL TRG

OFF

FACTORY DEFAULTS

￿

OSD COLOR

BW

￿

￿

❖EXTERNAL TRG

Set the EXTERNAL TRG menu to ON and press the SETUP switch to display the appropriate screen.

￿EXTERNAL TRG￿

 

 

 

STILL TIME

 

OFF

DELAY TIME

FIX

￿

￿

You can set the STILL TIME to 0~4 seconds.

If DELAY TIME is set to FIX, the DELAY TIME will be set in sync with the STILL TIME; if set to USER, the DELAY TIME will be set to your setting.

Note :

–If VPS is set to OFF, the EXTERNAL TRG menu will be deactivated.

❖FACTORY DEFAULTSAll the settings will be restored to the factory default.

However, the settings of PROTOCOL, BAUD RATE, ADDRESS and LANGUAGE will not be restored to the default.

❖ OSD COLOR

[BW, R/G/B]

You can set the OSD(On-screen Display) color to COLOR or B/W.

COMMUNICATION

￿COMMUNICATION￿

RS-485

PROTOCOL SAMSUNG

BAUD RATE 9600

ADDRESS0

￿￿

The COMMUNICATION menu is used to configure the settings regarding RS-485 communications.

Use the rear panel of the camera to connect to RS-485.[Camera I/O Connector]

Use the ￿￿￿￿ switch to specify the protocol, baud rate and address (0~255) for communications.

❖PROTOCOLSelect a communication protocol.

❖BAUD RATE Select a baud rate.

Note :

–The baud rate differs, depending on the specified protocol.
❖ ADDRESS[0~255]

You must specify a unique address for each camera in the same RS-485 network.

To control a specific camera, you must match the address of the camera with that of the DVR or the controller.

26 – DIGITAL COLOR CAMERA