How to use OSD Menu
For normal operation, you must select DC for a
The LEVEL menu is used to adjust the overall brightness, where “+” will increase the brightness and
②If you set the BACKLIGHT option to BLC, you will see a menu where you can set the BLC area.
you can set the desired BLC zone by defining the size and location.
|
| ALC |
|
LENS |
| DC | |
LEVEL | |||
| BACKLIGHT |
| BLC |
| AREA |
| USER |
| <SIZE> |
|
|
| <LOCATION> |
| |
If you use an ordinary camera in a scene with an intensive backlight, the object will be displayed dark on the monitor affected by the backlight. To solve this problem, you can use the BLC(Back Light Compensation) function to improve the sharpness of the image in such a high contrast scene.
③If you set the BACKLIGHT option to WDR, you will see a menu where you can set the WDR options.
You can adjust the shutter speed in WDR LEVEL and the brightness in WEIGHT.
You can also select any of OUTDOOR, and INDOOR in WHITE BAL.
|
| ALC |
LENS | DC | |
LEVEL | [ | |
BACKLIGHT |
| WDR |
WEIGHT | MID | |
WDR LEVEL | [ | |
WHITE BAL | INDOOR | |
WDR(Wide Dynamic Range) extends the gain range of the screen that is mostly useful if you take a simultaneous picture of both indoor and outside of the window.
Namely, it improves the sharpness of the picture in outdoor scenery as well as indoor.
Note :
–If you use the VPS (Virtual Progressive Scan) function, the CCD reads differently so you can not use WDR simultaneously.
If you set VPS to ON, WDR will be automatically set to OFF.•ELC (Electronic Light Control)①If you press the SETUP switch when the ELC submenu is selected, the corresponding screen appears. You can make the ELC (Electronic Light Control) function active or not.
| ELC |
|
LEVEL | ||
BACKLIGHT |
| OFF |
| ELC |
|
LEVEL | ||
BACKLIGHT |
| BLC |
AREA |
| USER |
<SIZE> |
|
|
<LOCATION> |
| |
|
|
|
ENG
English – 17