How to use OSD Menu

INTELLIGENCE

 

 

 

 

 

 

 

 

￿FENCE￿

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LINE

 

OFF

￿INTELLIGENCE￿

AREA

 

OFF

MOTION

 

 

 

OFF

 

 

 

 

ADVANCED

 

 

 

OFF

 

 

 

 

MASK AREA

1 2 3 4

 

 

 

 

 

DISPLAY

 

 

 

ON

 

 

 

 

SENSITIVITY

[4]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RESOLUTION

[5]

 

 

 

￿

￿

￿

 

 

 

ALARM OUT

 

 

 

 

￿

 

 

 

 

￿

 

 

 

 

￿

 

 

 

 

You can set the motion detection and tracking in the INTELLIGENCE menu.

MOTION

[OFF,TRACKING,DETECTION]

TRACKINGDetects and tracks a moving object.DETECTIONDetects a moving object.

You can set the position and detection direction of the LINE, and the size and position of the AREA.

- How to set the line

 

￿LINE￿

 

 

 

 

 

 

 

PIXEL LEVEL

 

[4]

 

 

 

 

 

<POINT>￿

 

 

 

 

 

DIRECTION

 

 

 

￿￿

￿

 

￿

 

 

￿

ENG

Note :

If it is set to DETECTION, you can not set such functions as FIXED/MOVED and FENCE in the ADVANCED menu.

ADVANCED

[OFF, FIXED/MOVED, FENCE]

Detects a motion of an object and displays an image of any moving object before tracking the moving route.

FENCE

This is to detect if a moving object passes through the specified LINE or AREA.

In a condition where a moving object is detected in an analysis of the previous and current frames whose movement overlaps a certain area, the system displays “PASS” if the object’s center line passes through the line while it displays “ENTER” or “EXIT” if the center point passes through the area.

If you press the SETUP switch with the LINE option set to ON, you can specify the position and detection direction of the line.

If you change the PIXEL LEVEL for setting

the position, specify the pixel that moves by a single pressure of the ￿￿￿￿ switch.

In <POINT>, you can specify the first position of the line by pressing the SETUP switch once, and

the second position by pressing the switch again. Use the ￿￿￿￿switch to specify the position.

Set each position of the two points and press the SETUP switch to complete the positioning.

If you change the DIRECTION, you can specify the detection direction. The detection direction based on the defined two points will be displayed on the screen.

English 23