Samsung SCC-B5367P, SCC-B5369P manual How to use OSD Menu, ‹AGC FIX‹ LEVEL01, ‹AGC USER‹ LEVEL16

How to use OSD Menu

❖AGC

[OFF, VERY LOW, LOW, MID, HIGH, VERY HIGH, USER, FIX]

The AGC (Auto Gain Control) menu is used to set the AGC level of the camera. When the AGC is active, the camera automatically increases the sensitivity by amplifying the Video signal when the strength of the signal falls below the normal value.

If OFF or FIX mode is selected in the SENS-UP menu, you can specify the AGC level.

If you press the SETUP switch with a USER sub menu selected, you will see the appropriate screen.

‹AGC FIX‹

LEVEL[01]

￿ ￿ ￿

If you press the SETUP switch with a FIX sub menu selected, you will see the appropriate screen.

As a fixed value of the AGC gain is used in FIX mode, you can select one of the 16 detailed levels from VERY LOW to VERY HIGH before fixing it.

ENG

‹AGC USER‹

LEVEL[16]

FIX mode is not available if you set the

BACKLIGHT function to WDR.

Note :

–If the DAY/NIGHT menu of the CAMERA SET is set to AUTO, the AGC menu will be deactivated.

–If FLICKERLESS is set to ON, the AGC FIX mode will be disabled.

￿ ￿ ￿ ❖ MOTION [S.SLOW, SLOW, NORM, FAST, F.FAST]

In USER mode, you can break down the level in 16 steps from VERY LOW to VERY HIGH to your preference.

The MOTION menu is used to adjust the strength of the AGC level for a control of the camera motion. This is available only if the SENS-UP menu is set to AUTO.

You can select one from S.SLOW, SLOW, NORM, FAST and F.FAST for the AGC level.

If you monitor a fast moving object in a low contrast scene, select F.FAST while select S.SLOW for a hardly moving object in the same lighting condition.

English – 19