IRIS

The IRIS menu is useful if you set to adjust the intensity of radiation incoming to the camera.

￿ALC : Adjust the open and close of the iris.

-LEVEL : Select an overall brightness level.

-BLC : With <BACKLIGHT> set to

<BLC>, you can specify the BLC area. With AREA set to <USER>, you can specify the position and size.

￿MANUAL : Adjust the iris level manually.

MThe overall brightness target of a camera will be set to ALC level 0, while the iris can be adjusted manually.

AGC

 

ALC

LEVEL

[ 00] ----I----

BACKLIGHT

BLC

AREA

USER

<SIZE>

 

<LOCATION>

 

MANUAL

LEVEL

[ 00] ----

I----

English

With this, you can adjust the AGC level of a
camera.

￿ CAMERA SET ￿

With AGC active, if the signal strength falls

CAMERA ID

OFF

below the standard level, AGC will amplify the

IRIS

ALC

video signal to automatically improve the

AGC

(VERY HIGH) ---

DNR

MID

sensitivity.

SHUTTER

OFF

If <SENS-UP> is set to <OFF>, or <FIX>

SENS-UP

OFF

mode, the <MOTION> menu will switch to

FLICKERLESS

OFF

<AGC>.

XDR

MID

With the USER () submenu selected, press [ENTER] to display the corresponding screen.

In this mode, you can select from VERY LOW

to VERY HIGH in 16 levels, enabling deeper, wider choices to your convenience. With the FIX ( ) submenu selected, press [ENTER] to display the corresponding screen. In this mode, you can select an individualized mode in 16 levels, regardless of the brightness.

English _25