Operation

CHECK POINTS BEFORE OPERATION

•Before power is applied, please check the cables carefully.

•The camera ID of the controller must be identical to that of the camera to be controlled. The camera ID can be checked in the System Information of OSD Menu.

•If your controller supports multi-protocols, the protocol must be changed to match to that of the camera.

•If you changed camera protocol by changing DIP switch, the change will be effective after you reboot the camera.

•Since the operation method can be different for each controller available, refer to the manual for your controller if camera can not be controlled properly.

PRESET AND PATTERN

FUNCTION PRE-CHECK

•Check how to operate Preset, Scan, Auto Pan and Pattern function with controller or DVR in advance to operate camera function using them. (refer to your System keyboard Manual)

•If controller or DVR has no pattern button or function, use shortcut keys with preset numbers. For more information, refer to “Reserved Preset” in this manual.

AUTO CALIBRATION

•If the camera is continuously subjected to very high temperature (over 50°C or 122°F) environment for a long time, it is possible for the camera to lose focus. As a result, you will get blurry image. In this case, it is recommended to turn on “AUTO CALIBRATION” by running Preset 165.

•If you execute AUTO CALIBRATION, camera will calibrate its focus at every 6 hours. To turn off this function, please, Run Preset 166.

STARTING OSD MENU

•Function

Using the OSD menu, Preset, Pattern, Auto Pan, Scan and Alarm Input function can be confi gured for each application.

•Enter Menu <Go Preset> [95]

RESERVED PRESET

•Description

Some Preset numbers are reserved for direct access to specifi c functions in OSD menu. These direct commands via preset provide quick execution of

various functions using keyboard controller as well as simplify the interface with DVR and IP equipments.

• Function

 

<Go Preset> [95]

: Enters into OSD menu

<Go Preset> [131~134]

: Runs Pattern Function 1 ~ 4

<Go Preset> [141~148]

: Runs Auto Pan Function 1 ~ 8

<Go Preset> [151~158]

: Runs Scan Function 1 ~ 8

<Go Preset> [161]

: Sets Relay Output to OFF

<Set Preset> [161]

: Sets Relay Output to ON

<Go Preset> [165]

: Auto Calibration ON

<Go Preset> [166]

: Auto Calibration OFF

<Go Preset> [167]

: Zoom Proportional Jog ON

<Set Preset>[167]

: Zoom Proportional Jog OFF

<Go Preset> [170]

: Sets Camera BLC Mode to OFF

<Go Preset> [171]

: Sets Camera BLC Mode to HIGH

<Go Preset> [174]

: Sets Camera Focus Mode to

 

AUTO

<Go Preset> [175]

: Sets Camera Focus Mode to

 

Manual

<Go Preset> [176]

: Sets Camera Focus Mode to

 

SEMI-AUTO

<Go Preset> [177]

: Sets Day & Night Mode to

 

AUTO1

<Go Preset> [178]

: Sets Day & Night Mode to

 

NIGHT

<Go Preset> [179]

: Sets Day & Night Mode to DAY

<Go Preset> [190]

: Sets OSD Display Mode to

 

AUTO (Except Privacy Mask)

<Go Preset> [191]

: Sets OSD Display Mode to OFF

 

(Except Privacy Mask)

<Go Preset> [192]

: Setting OSD Display Mode to

 

ON (Except Privacy Mask)

<Go Preset> [193]

: Sets all Privacy Mask Display to

 

OFF

<Go Preset> [194]

: Sets all Privacy Mask Display to

 

ON

<Go Preset> [195]

: Heater ON (Turn off after 5mins

 

and switch to Auto mode)

<Go Preset> [196]

: Heater OFF (Turn off and switch

 

to Manual mode)

<Go Preset> [197]

: Fan ON (Turn off after 5mins

 

and switch to Auto mode)

<Go Preset> [198]

: Fan OFF (Turn off and switch to

 

Manual mode)

<Go Preset>[200]

: Digital Zoom ON

<Go Preset>[201]

: Digital Zoom OFF

ENG

English – 21

Page 20 Page 22
Page 21
Image 21
Samsung SCC-C6323P Operation, Preset and Pattern Function PRE-CHECK, Auto Calibration, Starting OSD Menu, Reserved Preset
Page 20 Page 22

SCC-C6325P, SCC-C6323N, SCC-C7325P, SCC-C7325N, SCC-C6323P specifications

The Samsung SCC-C6323P, SCC-C7325N, SCC-C7325P, SCC-C6323N, and SCC-C6325P are part of Samsung’s innovative line of security cameras designed to deliver high-quality surveillance for both indoor and outdoor environments. These cameras are equipped with advanced features and technologies that enhance their performance, making them suitable for various applications, from home security to commercial use.

The SCC-C6323P is equipped with a 1/3-inch CCD sensor, offering high-resolution video capture at 600 TV lines. Its built-in 2.8 to 10 mm varifocal lens allows for flexible focal length adjustments, ensuring optimal coverage in diverse settings. Furthermore, it features Day/Night functionality, which utilizes an infrared cut filter to deliver superior image quality in varying lighting conditions.

Next, the SCC-C7325N and SCC-C7325P models are designed with a robust 1/3-inch CCD sensor as well, delivering exceptional video clarity. The main differentiator is the lens capabilities: the SCC-C7325N features a standard lens, while the SCC-C7325P is equipped with a powerful varifocal lens. These cameras also include advanced technologies such as motion detection and privacy masking, enhancing security measures by allowing users to customize the areas of focus.

The SCC-C6323N is another excellent option, focusing on a balance between quality and affordability. This model maintains a resolution of 600 TV lines and utilizes a 2.5-6 mm lens, making it versatile for various surveillance applications. By incorporating Samsung’s noise reduction technology, this model ensures clear images even in low-light scenarios.

Lastly, the SCC-C6325P model stands out for its adaptive lens capabilities and enhanced low-light performance. It provides sharper images with improved color reproduction, making it ideal for monitoring critical areas needing constant vigilance.

In summary, the Samsung SCC series exemplifies a commitment to quality in surveillance technology. With features such as high-resolution sensors, flexible lens options, Day/Night operation, and advanced motion detection, these cameras provide reliable security solutions that meet the needs of diverse environments, ensuring peace of mind for users.
Top Page Image Contents