Samsung SCC-C6325P, SCC-C7325P, SCC-C6323P Function Setup, Parking Action Setup, Alarm Input Setup

How to use OSD Menu

• AUTO FLIP	[ON/OFF]
Refer to “Other Functions” section.
• JOG MAX SPEED	[2°/sec ~360°/sec]

Sets maximum jog speed. Jog speed is inversely proportional to zoom magnifi cation. As zoom magnifi cation goes up, pan/tilt speed goes down.

• JOG DIRECTION [INVERSE/NORMAL]

If you set this to ‘Normal’, the view in the screen is moving same direction with jog tilting. If ‘Inverse’ is selected, the view in the screen is moving reversely.

• FREEZE IN PRESET [ON/OFF]

At start point of preset movement, camera starts freezing the image of start point. Camera keeps displaying the image of start point during preset movement and does not display the images which camera gets during preset movement. As soon as camera stops at preset end point, camera starts displaying live images which it gets at preset end point.

This function availability should be different by models.

❖Parking Action Setup

PARKING ACTION SETUP

PARK ENABLE		OFF
WATT	TIME	00:10:00
PARK	ACTION	HOME

❖Alarm Input Setup

ALARM INPUT SETUP

ALARM1	N.O	PRESET1
ALARM2	N.C	NOT USED

BACK

EXIT

Match the Alarm sensor input to one of Preset positions. If an external sensor is activated, camera will move to corresponding preset position when this item is predefi ned.

• ALARM TYPE
[Normal OPEN(N.O) / Normal CLOSE](N.C)]
Sets sensor input type.	ENG
• ALARM ACTION
[NOT USED/HOME/PRESET 1~128/SCAN 1~8,
PATTERN1~4, SCAN 1~4]
For each Alarm input, you can assign
counteraction functions (Preset, Auto Pan, Pattern
and Scan).

BACK

EXIT

If Park Enable is set to ON, camera runs assigned function automatically if there is no PTZ command during assigned “Wait Time”.

•	PARK ENABLE	[ON/OFF]
•	WAIT TIME	[5 seconds ~ 4 hour]

The time is displayed with “hh:mm:ss” format and you can change this by 1 min unit.

• PARK ACTION	[HOME/PRESET/PATTERN/
	AUTO PAN/SCAN]

Ex) If HOME is selected for Park Action, camera will move to home position when there is no PTZ command during assigned “Wait Time.”

FUNCTION SETUP

FUNCTION SETUP

<PRESET SETUP> <AUTO PAN SETUP> <PATTERN SETUP> <SCAN SETUP> <SCHEDULE SETUP>

BACK

EXIT

Confi gure 5 Special Functions with this menu

•PRESET SETUP

127 Presets from the number 1 to 128 can be assigned excluding preset 95 reserved for Menu.

English – 27