ZyXEL Communications 792H Remote Node Configuration, Remote Node Overview, Remote Node Setup

Models: 792H

1 428
Download 428 pages 12.67 Kb
Page 271
Image 271

Prestige 791R G.SHDSL Router

Chapter 24

Remote Node Configuration

This chapter covers remote node configuration.

24.1 Remote Node Overview

This section describes the protocol-independent parameters for a remote node. A remote node is required for placing calls to a remote gateway. A remote node represents both the remote gateway and the network behind it across a WAN connection. When you use Menu 4 to set up Internet access, you are configuring one of the remote nodes.

You first choose a remote node in Menu 11- Remote Node Setup. You can then edit that node’s profile in menu 11.1, as well as configure specific settings in three submenus: edit IP and bridge options in menu 11.3; edit ATM options in menu 11.6; and edit filter sets in menu 11.5.

24.2 Remote Node Setup

To configure a remote node, follow these steps:

Step 1. From the Main Menu, select menu option 11 Remote Node Setup.

Step 2. When Menu 11 appears as shown in the following figure, type the number of the remote node that you want to configure.

Remote Node TCP/IP Configuration

24-1

Page 271
Image 271
ZyXEL Communications 792H manual Remote Node Configuration, Remote Node Overview, Remote Node Setup