ZyXEL Communications 792H manual Both Both, In Only, Out Only or None, RIP-1,RIP-2B or RIP-2M

	Prestige 792H G.SHDSL Router
	Table 22-2 TCP/IP and DHCP Ethernet Setup
FIELD	DESCRIPTION	EXAMPLE
DHCP Setup
DHCP	If set to Server, your Prestige can assign IP addresses, an IP
	default gateway and DNS servers to Windows 95, Windows	Server
	NT and other systems that support the DHCP client.
		(default)
	If set to None, the DHCP server will be disabled.
	If set to Relay, the Prestige acts as a surrogate DHCP server
	and relays DHCP requests and responses between the
	remote server and the clients. Enter the IP address of the
	actual, remote DHCP server in the Remote DHCP Server in
	this case.
	When DHCP is used, the following items need to be set:
Client IP Pool Starting	This field specifies the first of the contiguous addresses in the	192.168.1.33
Address	IP address pool.
Size of Client IP Pool	This field specifies the size or count of the IP address pool.	32
Primary DNS Server	Enter the IP addresses of the DNS servers. The DNS servers
Secondary DNS	are passed to the DHCP clients along with the IP address and
	the subnet mask.
Server
Remote DHCP Server	If Relay is selected in the DHCP field above then enter the IP
	address of the actual remote DHCP server here.
TCP/IP Setup
IP Address	Enter the (LAN) IP address of your Prestige in dotted decimal	192.168.1.1
	notation
IP Subnet Mask	Your Prestige will automatically calculate the subnet mask	255.255.255.
	based on the IP address that you assign. Unless you are	0
	implementing subnetting, use the subnet mask computed by
	the Prestige.
RIP Direction	Press [SPACE BAR] to select the RIP direction. Choices are	Both
	Both, In Only, Out Only or None.	(default)
Version	Press [SPACE BAR] to select the RIP version. Choices are	RIP-1
	RIP-1,RIP-2B or RIP-2M.	(default)

LAN 22-5