ZyXEL Communications 792H manual Snmp Traps, Trap # Trap Name Description

Prestige 791R G.SHDSL Router

Menu 22 - SNMP Configuration

SNMP:

Get Community= public

Set Community= public

Trusted Hgst= 0.0.0.0

Trap:

Community= public

Destination= 0.0.0.0

Press ENTER to Confirm or ESC to Cancel:

Figure 29-2 SNMP Configuration

Table 29-1 SNMP Configuration

FIELD	DESCRIPTION	EXAMPLE
SNMP:
Get Community	Type the Get Community, which is the password for the incoming	public
	Get- and GetNext requests from the management station.
Set Community	Type the Set community, which is the password for incoming Set	public
	requests from the management station.
Trusted Host	If you enter a trusted host, your Prestige will only respond to SNMP	0.0.0.0
	messages from this address. A blank (default) field means your
	Prestige will respond to all SNMP messages it receives, regardless
	of source.
Trap:	Type the trap community, which is the password sent with each	public
Community
	trap to the SNMP manager.
Destination	Type the IP address of the station to send your SNMP traps to.	0.0.0.0

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

29.4 SNMP Traps

The Prestige will send traps to the SNMP manager when any one of the following events occurs:

Table 29-2 SNMP Traps

TRAP #	TRAP NAME	DESCRIPTION
1	coldStart (defined in RFC-1215)	A trap is sent after booting (power on).

SNMP Configuration 29-3