ZyXEL Communications 792H Editing Filter Sets, Both/ None /In Only /Out Only and None, RIP-1

Prestige 792H G.SHDSL Router

Table 21-5 Remote Node Network Layer Options

FIELD	DESCRIPTION	EXAMPLE
Private	This parameter determines if the Prestige will include the route to this	No
	remote node in its RIP broadcasts. If set to Yes, this route is kept private	(default)
	and not included in RIP broadcasts. If No, the route to this remote node
	will be propagated to other hosts through RIP broadcasts.
RIP	Press [SPACE BAR] and then [ENTER] to select the RIP direction from	Both
Direction	Both/ None/In Only/Out Only and None.	(default)
Version	Press [SPACE BAR] and then [ENTER] to select the RIP version from	RIP-1
	RIP-1/RIP-2B/RIP-2M.
Multicast	IGMP (Internet Group Multicast Protocol) is a session-layer protocol	None
	used to establish membership in a Multicast group. The Prestige	(default)
	supports both IGMP version 1 (IGMP-v1) and version 2 (IGMP-v2).
	Press the [SPACE BAR] to enable IP Multicasting or select None to
	disable it. See the LAN Setup chapter for more information on this
	feature.

Once you have completed filling in Menu 11.3 Remote Node Network Layer Options, press [ENTER] at the message “Press ENTER to Confirm...” to save your configuration and return to menu 11, or press [ESC] at any time to cancel.

21.2.3 Editing Filter Sets

Move the cursor to the field Edit Filter Sets in menu 11.1, and then press [SPACE BAR] to set the value to Yes. Press [ENTER] to open Menu 11.5 - Remote Node Filter.

Use menu 11.5 to specify the filter set(s) to apply to the incoming and outgoing traffic between this remote node and the Prestige to prevent certain packets from triggering calls. You can specify up to four filter sets separated by commas, for example, 1, 5, 9, 12, in each filter field. Note that spaces are accepted in this field. Please refer to the Filters chapter for more information on defining the filters.

Dial Backup 21-9