ZyXEL Communications 792H manual Press Enter to go to Menu 11.3 Remote Node Network

Prestige 792H G.SHDSL Router

Table 21-4 Remote Node Profile (Backup ISP)

FIELD	DESCRIPTION	EXAMPLE
Pri Phone #	Enter the first (primary) phone number from the ISP for this remote
Sec Phone #	node. If the Primary Phone number is busy or does not answer, your
	Prestige dials the Secondary Phone number if available. Some areas
	require dialing the pound sign # before the phone number for local
	calls. Include a # symbol at the beginning of the phone numbers as
	required.
Edit PPP	Move the cursor to this field and use the space bar to select [Yes] and	No
Options	press [Enter] to edit the PPP options for this remote node. This brings	(default)
	you to Menu 11.2 - Remote Node PPP Options (see section 21.2.1).
Rem IP Addr	Leave the field set to 0.0.0.0 (default) if the remote gateway has a	0.0.0.0
	dynamic IP address. Enter the remote gateway’s IP address here if it	(default)
	is static.
Edit IP	This field leads to a “hidden” menu. Press [SPACE BAR] to select Yes	No
	and press [ENTER] to go to Menu 11.3 - Remote Node Network	(default)
	Layer Options. See section 21.2.2 for more information.
Telco Option
Allocated	Enter the maximum number of minutes that this remote node may be	0
Budget	called within the time period configured in the Period field. The default	(default)
	for this field is 0 meaning there is no budget control and no time limit
	for accessing this remote node.
Period (hr)	Enter the time period (in hours) for how often the budget should be	0
	reset. For example, to allow calls to this remote node for a maximum	(default)
	of 10 minutes every hour, set the Allocated Budget to 10 (minutes)
	and the Period to 1 (hour).
Nailed-Up	Press [SPACE BAR] to select Yes to set this connection to always be	No
Connection	on, regardless of whether or not there is any traffic. Select No to have	(default)
	this connection act as a dial-up connection.
Session
Options
Edit Filter sets	This field leads to another “hidden” menu. Use [SPACE BAR] to select	No
	Yes and press [ENTER] to open menu 11.5 to edit the filter sets.	(default)
Idle Timeout	Enter the number of seconds of idle time (when there is no traffic from	100
	the Prestige to the remote node) that can elapse before the Prestige	seconds
	automatically disconnects the PPP connection. This option only	(default)
	applies when the Prestige initiates the call.

21-6 Dial Backup