ZyXEL Communications 792H manual GUI-based FTP Clients, Tftp and FTP over WAN Will Not Work When

Prestige 792H G.SHDSL Router

331 Enter PASS command Password:

230 Logged in ftp> bin

200 Type I OK

ftp> get rom-0 zyxel.rom 200 Port command okay

150 Opening data connection for STOR ras

226 File received OK

ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec. ftp> quit

Figure 31-2 FTP Session Example

31.2.4 GUI-based FTP Clients

The following table describes some of the commands that you may see in GUI-based FTP clients.

Table 31-2 General Commands for GUI-based FTP Clients

COMMAND	DESCRIPTION
Host Address	Enter the address of the host server.
Login Type	Anonymous.
	This is when a user I.D. and password is automatically supplied to the
	server for anonymous access. Anonymous logins will work only if your
	ISP or service administrator has enabled this option.
	Normal.
	The server requires a unique User ID and Password to login.
Transfer Type	Transfer files in either ASCII (plain text format) or in binary mode.
Initial Remote Directory	Specify the default remote directory (path).
Initial Local Directory	Specify the default local directory (path).

31.2.5 TFTP and FTP over WAN Will Not Work When

TFTP, FTP and Telnet over WAN will not work when:

1.You have disabled Telnet service and remote management.

2.You have applied a filter in menu 3.1 (LAN) or in menu 11.5 (WAN) to block Telnet service.

3.The IP address in the Secured Client IP field in menu 24.11 does not match the client IP. If it does not match, the Prestige will disconnect the Telnet session immediately.

31-4 Firmware and Configuration File Maintenance