ZyXEL Communications 792H manual One-to-One, For Server, To-One,Many-to-One and Server types

Prestige 791R G.SHDSL Router

		Menu 15.1.1.1 Address Mapping Rule
	Type= One-to-One
	Local IP:
	Start=
	End	= N/A
	Global IP:
	Start=
	End	= N/A
	Server Mapping Set= N/A
		Press ENTER to Confirm or ESC to Cancel:
	Press Space Bar to Toggle.
	Figure 27-7 Editing/Configuring an Individual Rule in a Set
	Table 27-4 Editing/Configuring an Individual Rule in a Set
FIELD		DESCRIPTION	EXAMPLE
Type	Press [SPACE BAR] and then [ENTER] to select from a total of five		One-to-One
	types. Server allows you to specify multiple servers of different
	types behind NAT to this computer. See section 27.4.3 for an
	example.
Local IP	Only local IP fields are N/A for server; Global IP fields MUST be set
	for Server.
Start	This is the starting local IP address (ILA).		0.0.0.0
End	This is the ending local IP address (ILA). If the rule is for all local			N/A
	IPs, then put the Start IP as 0.0.0.0 and the End IP as
	255.255.255.255. This field is N/A for One-to-One and Server types.
Global IP
Start	This is the starting global IP address (IGA). If you have a dynamic		0.0.0.0
	IP, enter 0.0.0.0 as the Global IP Start. Note that Global IP Start
	can be set to 0.0.0.0 only if the types are Many-to-Oneor Server.
End	This is the ending global IP address (IGA). This field is N/A for One-			N/A
	to-One,Many-to-One and Server types.
Server	Only available when Type is set to Server. Type a number from 1 to
Mapping Set	10 to choose a server set from menu 15.2.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

27-8 NAT