ZyXEL Communications 792H manual Network Temporarily Disconnected

Prestige 792H G.SHDSL Router

The following table describes the labels in this screen.

	Table 17-6 Firmware Upgrade
LABEL	DESCRIPTION
File Path	Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse...	Click Browse... to find the .bin file you want to upload. Remember that you must decompress
	compressed (.zip) files before you can upload them.
Upload	Click Upload to begin the upload process. This process may take up to two minutes.
Reset	Click this button to clear all user-entered configuration information and return the Prestige to
	its factory defaults. Refer to the Resetting the Prestige section.

Do not turn off the Prestige while firmware upload is in progress!

After you see the Firmware Upload in Process screen, wait two minutes before logging into the Prestige again.

The Prestige automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop.

Figure 17-8 Network Temporarily Disconnected

After two minutes, log in again and check your new firmware version in the System Status screen.

If the upload was not successful, the following screen will appear. Click Back to go back to the Firmware screen.

Figure 17-9 Error Message

Maintenance 17-11