ZyXEL Communications 792H manual Bridge Static Route Setup

Prestige 791R G.SHDSL Router

Menu 12.3 - Bridge Static Route Setup

1.________

2.________

3.________

4.________

Enter selection number:

Figure 26-2 Bridge Static Route Setup

Choose a static route to edit in menu 12.3. You configure bridge static routes in menu 12.3.1 as shown next.

	Menu 12.3.1 - Edit Bridge Static Route
	Route #: 1
	Route Name=
	Active= No
	Ether Address= ?
	IP Address=
	Gateway Node= 1
	Press ENTER to Confirm or ESC to Cancel:
	Figure 26-3 Edit Bridge Static Route
	Table 26-2 Edit Bridge Static Route
FIELD	DESCRIPTION
Route #	This is the route index number you typed in Menu 12.3 – Bridge Static Route Setup.
Route Name	Type a name for the bridge static route for identification purposes.
Active	Indicates whether the static route is active (Yes) or not (No).
Ether Address	Type the MAC address of the destination computer that you want to bridge the
	packets to.
IP Address	If available, type the IP address of the destination computer that you want to bridge
	the packets to.
Gateway Node	Press [SPACE BAR] and then [ENTER] to select the number of the remote node (one
	to eight) that is the gateway of this static route.

Bridging Setup 26-3