ZyXEL Communications 792H manual System Maintenance and Information, Command Interpreter Mode

Prestige 791R G.SHDSL Router

Chapter 32

System Maintenance and Information

This chapter leads you through SMT menus 24.8 to 24.10.

32.1 Command Interpreter Mode

The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from the SMT by selecting menu 24.8. See the included disk or the zyxel.com web site for more detailed information on CI commands. Enter 8 from Menu 24 — System Maintenance. A list of valid commands can be found by typing help or ? at the command prompt. Type “exit” to return to the SMT main menu when finished.

Menu 24 - System Maintenance

1.System Status

2.System Information

3.Log and Trace

4.Diagnostic

5.Backup Configuration

6.Restore Configuration

7.Firmware Update

8.Command Interpreter Mode

9.Call Control

10.Time and Date Setting

11.Remote Management

Enter Menu Selection Number:

Figure 32-1 Command Mode in Menu 24

System Maintenance and Information 32-1