ZyXEL Communications 792H manual Remote Management Configuration, Remote Management Overview

Prestige 792H G.SHDSL Router

Chapter 15

Remote Management Configuration

This chapter provides information on configuring remote management

15.1 Remote Management Overview

Remote management allows you to determine which services/protocols can access which Prestige interface (if any) from which computers.

You may manage your Prestige from a remote location via:
Internet (WAN only)	ALL (LAN and WAN)
LAN only	Neither (Disable)

To disable remote management of a service, select Disable in the corresponding Server Access field.

15.1.1 Remote Management Limitations

Remote management over LAN or WAN will not work when:

1.A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, FTP or Web service.

2.You have disabled that service in one of the remote management screens.

3.The IP address in the Secured Client IP field does not match the client IP address. If it does not match, the Prestige will disconnect the session immediately.

4.There is an SMT console session running.

5.There is already another remote management session of the same type (web, FTP or Telnet) running. You may only have one remote management session of the same type running at one time.

6.There is a web remote management session running with a Telnet session. A web session will be disconnected if you begin a Telnet session; it will not begin if there already is a Telnet session.

7.There is a firewall rule that blocks it.

15.1.2 Remote Management and NAT

When NAT is enabled:

Remote Management 15-1