ZyXEL Communications 792H manual VPN Screens 14-11

	Prestige 792H G.SHDSL Router
	Table 14-7 VPN IKE
LABEL	DESCRIPTION
End / Subnet Mask	When the Remote Address Type field is configured to Single, enter the IP address
	in the IP Address Start field again here. When the Remote Address Type field is
	configured to Range, enter the end (static) IP address, in a range of computers on
	the network behind the remote IPSec router. When the Remote Address Type field
	is configured to Subnet, enter a subnet mask on the network behind the remote
	IPSec router.
Address
Information
Local ID Type	Select IP to identify this Prestige by its IP address.
	Select DNS to identify this Prestige by a domain name.
	Select E-mailto identify this Prestige by an e-mail address.
Content	When you select IP in the Local ID Type field, type the IP address of your computer
	or leave the field blank to have the Prestige automatically use its own IP address.
	When you select DNS in the Local ID Type field, type a domain name (up to 31
	characters) by which to identify this Prestige.
	When you select E-mailin the Local ID Type field, type an e-mail address (up to 31
	characters) by which to identify this Prestige.
	The domain name or e-mail address that you use in the Content field is used for
	identification purposes only and does not need to be a real domain name or e-mail
	address.
My IP Address	Enter the WAN IP address of your Prestige. The Prestige uses its current WAN IP
	address (static or dynamic) in setting up the VPN tunnel if you leave this field as
	0.0.0.0. The VPN tunnel has to be rebuilt if this IP address changes.
Peer ID Type	Select IP to identify the remote IPSec router by its IP address.
	Select DNS to identify the remote IPSec router by a domain name.
	Select E-mailto identify the remote IPSec router by an e-mail address.

VPN Screens 14-11