ZyXEL Communications 792H manual VPN Screens 14-9

Prestige 792H G.SHDSL Router

The following table describes the labels in this screen.

	Table 14-7 VPN IKE
LABEL	DESCRIPTION
IPSec Setup
Active	Select this check box to activate this VPN policy.
Keep Alive	Select either Yes or No from the drop-down list box.
	Select Yes to have the Prestige automatically reinitiate the SA after the SA lifetime
	times out, even if there is no traffic. The remote IPSec router must also have keep
	alive enabled in order for this feature to work.
Name	Type up to 32 characters to identify this VPN policy. You may use any character,
	including spaces, but the Prestige drops trailing spaces.
IPSec Key Mode	Select IKE or Manual from the drop-down list box. Manual is a useful option for
	troubleshooting if you have problems using IKE key management.
Negotiation Mode	Select Main or Aggressive from the drop-down list box. Multiple SAs connecting
	through a secure gateway must have the same negotiation mode.
Encapsulation	Select Tunnel mode or Transport mode from the drop-down list box.
Mode
DNS Server (for	If there is a private DNS server that services the VPN, type its IP address here. The
IPSec VPN)	Prestige assigns this additional DNS server to the Prestige 's DHCP clients that have
	IP addresses in this IPSec rule's range of local addresses.
	A DNS server allows clients on the VPN to find other computers and servers on the
	VPN by their (private) domain names.
Local	Local IP addresses must be static and correspond to the remote IPSec router's
	configured remote IP addresses.
	Two active SAs can have the same configured local or remote IP address, but not
	both. You can configure multiple SAs between the same local and remote IP
	addresses, as long as only one is active at any time.
	In order to have more than one active rule with the Secure Gateway Address field
	set to 0.0.0.0, the ranges of the local IP addresses cannot overlap between rules.
	If you configure an active rule with 0.0.0.0 in the Secure Gateway Address field and
	the LAN’s full IP address range as the local IP address, then you cannot configure
	any other active rules with the Secure Gateway Address field set to 0.0.0.0.

VPN Screens 14-9