ZyXEL Communications 792H manual IP Routing Policy Setup

Prestige 792H G.SHDSL Router

IPPR follows the existing packet filtering facility of RAS in style and in implementation. The policies are divided into sets, where related policies are grouped together. A user defines the policies before applying them to an interface or a remote node, in the same fashion as the filters. There are 12 policy sets with six policies in each set.

33.2 IP Routing Policy Setup

Menu 25 shows all the policies defined.

	Menu 25 - IP Routing Policy Setup
Policy	Name	Policy	Name
Set #		Set #
------	-----------------	------	-----------------
1	test	7	_______________
2	_______________	8	_______________
3	_______________	9	_______________
4	_______________	10	_______________
5	_______________	11	_______________
6	_______________	12	_______________

Enter Policy Set Number to Configure= 0

Edit Name= N/A

Press ENTER to Confirm or ESC to Cancel:

Figure 33-1 IP Routing Policy Setup

To setup a routing policy, perform the following procedures:

Step 1. Type 25 in the main menu to open Menu 25 – IP Routing Policy Setup.

Step 2. Type the index of the policy set you want to configure to open Menu 25.1 – IP Routing Policy Setup.

Menu 25.1 shows the summary of a policy set, including the criteria and the action of a single policy, and whether a policy is active or not. Each policy contains two lines. The former part is the criteria of the incoming packet and the latter is the action. Between these two parts, separator “” means the action is taken on criteria matched and separator “=” means the action is taken on criteria not matched.

33-2 IP Policy Routing