ZyXEL Communications 792H manual Menu 27.1.1 IPSec Setup, IPSec Summary

Prestige 792H G.SHDSL Router

		Menu 27.1.1 – IPSec Setup
Index= 1		Name= Taiwan
Active= Yes		Keep Alive= No
Local ID type= IP		Content=
My IP Addr= 0.0.0.0
Peer ID type= IP		Content=
Secure Gateway Address= zw50test.zyxel.com.tw
Protocol= 0		DNS Server= 0.0.0.0
Local:	Addr Type= SINGLE		End/Subnet Mask= N/A
IP Addr Start= 1.1.1.1
Remote:	Port Start= 0		End= N/A
	Addr Type= SUBNET		End/Subnet Mask= 255.255.0.0
IP Addr Start= 4.4.4.4
	Port Start= 0		End= N/A
Enable Replay Detection = No
Key Management= IKE
Edit Key Management Setup= No

Press ENTER to Confirm or ESC to Cancel:

Figure 36-4 Menu 27.1.1 IPSec Setup

The following table describes the fields in this menu.

Table 36-2 Menu 27.1.1 IPSec Setup

FIELD	DESCRIPTION	EXAMPLE
Index	This is the VPN rule index number you selected in the previous menu.	1
Name	Enter a unique identification name for this VPN rule. The name may be up	Taiwan
	to 32 characters long but only 10 characters will be displayed in Menu
	27.1 - IPSec Summary.
Active	Press [SPACE BAR] to choose either Yes or No. Choose Yes and press	Yes
	[ENTER] to activate the VPN tunnel. This field determines whether a VPN
	rule is applied before a packet leaves the firewall.
Keep Alive	Press [SPACE BAR] to choose either Yes or No. Choose Yes and press	No
	[ENTER] to have the Prestige automatically re-initiate the SA after the SA
	lifetime times out, even if there is no traffic. The remote IPSec router must
	also have keep alive enabled in order for this feature to work.
Local ID type	Press [SPACE BAR] to choose IP, DNS, or E-mailand press [ENTER].
	Select IP to identify this Prestige by its IP address.
	Select DNS to identify this Prestige by a domain name.
	Select E-mailto identify this Prestige by an e-mail address.

36-6 VPN/IPSec Setup