ZyXEL Communications 792H manual Label Description, 57600 , 115200 or 230400 bps

Prestige 792H G.SHDSL Router

The following table describes the fields in this screen.

	Table 5-3 Advanced WAN Backup
LABEL	DESCRIPTION
Basic
Login Name	Type the login name assigned by your ISP.
Password	Type the password assigned by your ISP.
Retype to Confirm	Type your password again to make sure that you have entered is correctly.
Authentication Type	Use the drop-down list box to select an authentication protocol for outgoing calls.
	Options are:
	CHAP/PAP - Your Prestige accepts either CHAP or PAP when requested by this
	remote node.
	CHAP - Your Prestige accepts CHAP only.
	PAP - Your Prestige accept PAP only.
Primary/ Secondary	Type the first (primary) phone number from the ISP for this remote node. If the
Phone Number	primary phone number is busy or does not answer, your Prestige dials the
	secondary phone number if available. Some areas require dialing the pound sign
	# before the phone number for local calls. Include a # symbol at the beginning of
	the phone numbers as required.
Dial Backup Port	Use the drop-down list box to select the speed of the connection between the dial
Speed	backup port and the external device. Available speeds are: 9600, 19200, 38400,
	57600, 115200 or 230400 bps.
AT Command Initial	Type the AT command string to initialize the WAN device. Consult the manual of
String	your WAN device connected to your dial backup port for specific AT commands.
Advanced Modem	Click the Edit button to display the Advanced Modem Setup screen and edit the
Setup	details of your dial backup setup.
TCP/IP Options
Metric	This field sets this route's priority among the three routes the Prestige uses
	(normal, traffic redirect and dial backup). Type a number (1 to 15) to set the
	priority of the dial backup route for data transmission. The smaller the number,
	the higher the priority.
	If the three routes have the same metrics, the priority of the routes is as follows:
	WAN, Traffic Redirect, Dial Backup.

WAN 5-15