ZyXEL Communications 792H manual Remote Node Filter

Prestige 791R G.SHDSL Router

Figure 24-4 Sample IP Addresses for a TCP/IP LAN-to-LAN Connection

24.4 Remote Node Filter

Move the cursor to the Edit Filter Sets field in menu 11.1, then press [SPACE BAR] to select Yes. Press [ENTER] to display Menu 11.5 – Remote Node Filter.

Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the incoming and outgoing traffic between this remote node and the Prestige and also to prevent certain packets from triggering calls. You can specify up to 4 filter sets separated by comma, for example, 1, 5, 9, 12, in each filter field.

Note that spaces are accepted in this field. The Prestige has prepackaged filter sets; refer to the chapter on Filter Configuration for details. Include these in the call filter sets if you want to prevent NetBIOS packets from triggering calls to a remote node.

24-8

Menu 11.5 - Remote Node Filter

Input Filter Sets: protocol filters= 12, 11

device filters=

Menu 11.5 - Remote Node Filter

Input Filter Sets: protocol filters= 12, 11

device filters= Output Filter Sets: protocol filters= device filters=

Enter here to CONFIRM or ESC to CANCEL:

Configuration