ZyXEL Communications 792H manual Navigating the SMT Interface, Main Menu Commands, ? or ChangeMe

Prestige 792H G.SHDSL Router

18.2 Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your Prestige.

Several operations that you should be familiar with before you attempt to modify the configuration are listed in the table below.

Table 18-1 Main Menu Commands

OPERATION	KEYSTROKE	DESCRIPTION
Move down to	[ENTER]	To move forward to a submenu, type in the number of the desired
another menu		submenu and press [ENTER].
Move up to a	[ESC]	Press [ESC] to move back to the previous menu.
previous menu
Move to a “hidden”	Press [SPACE	Fields beginning with “Edit” lead to hidden menus and have a
menu	BAR] to change No	default setting of No. Press [SPACE BAR] once to change No to
	to Yes then press	Yes, then press [ENTER] to go to the “hidden” menu.
	[ENTER].
Move the cursor	[ENTER] or	Within a menu, press [ENTER] to move to the next field. You can
	[UP]/[DOWN] arrow	also use the [UP]/[DOWN] arrow keys to move to the previous
	keys.	and the next field, respectively.
Entering	Type in or press	You need to fill in two types of fields. The first requires you to type
information	[SPACE BAR], then	in the appropriate information. The second allows you to cycle
	press [ENTER].	through the available choices by pressing [SPACE BAR].
Required fields	<? > or ChangeMe	All fields with the symbol <?> must be filled in order to be able to
		save the new configuration.
		All fields with ChangeMe must not be left blank in order to be
		able to save the new configuration.
N/A fields	<N/A>	Some of the fields in the SMT will show a <N/A>. This symbol
		refers to an option that is Not Applicable.
Save your	[ENTER]	Save your configuration by pressing [ENTER] at the message
configuration		“Press ENTER to confirm or ESC to cancel”. Saving the data on
		the screen will take you, in most cases to the previous menu.
Exit the SMT	Type 99, then press	Type 99 at the main menu prompt and press [ENTER] to exit the
	[ENTER].	SMT interface.

After you enter the password, the SMT displays the main menu, as shown next.

19-4 Introducing the SMT