ZyXEL Communications 792H System Maintenance Menu Syslog Parameters, Parameter Description, Cdr

			Prestige 791R G.SHDSL Router
		Table 30-3 System Maintenance Menu — Syslog Parameters
		PARAMETER	DESCRIPTION
	UNIX Syslog:
		Active	Use [SPACE BAR] and then [ENTER] to turn syslog on or off.
		Syslog IP Address	Type the IP address of your syslog server.
		Log Facility	Use [SPACE BAR] and then [ENTER] to select one of seven different local options.
			The log facility lets you log the message in different server files. Refer to your UNIX
			manual.
	Types:
		CDR	Call Detail Record (CDR) logs all data phone line activity if set to Yes.
		Packet Triggered	The first 48 bytes or octets and protocol type of the triggering packet is sent to the
			UNIX syslog server when this field is set to Yes.
		Filter Log	No filters are logged when this field is set to No. Filters with the individual filter Log
			Filter field set to Yes are logged when this field is set to Yes.
		PPP Log	PPP events are logged when this field is set to Yes.
The following are examples of the four types of syslog messages sent by the Prestige:
			1 - CDR
		SdcmdSyslogSend ( SYSLOG_CDR, SYSLOG_INFO, String);
		String = board xx line xx channel xx, call xx, str
		board = the hardware board ID
		line = the WAN ID in a board
		Channel = channel ID within the WAN
		call = the call reference number which starts from 1 and increments by 1 for each new call
		str = C01 Outgoing Call dev xx ch xx (dev:device No. ch:channel No.)
		C01 Incoming Call xxxxBps xxxxx (L2TP, xxxxx = Remote Call ID)
		C01 Incoming Call xxxx (= connected speed) xxxxx (= Remote Call ID)
		L02 Tunnel Connected (L2TP)
		C02 OutCall Connected xxxx (= connected speed) xxxxx (= Remote Call ID)
		C02 CLID call refused
		L02 Call Terminated
		C02 Call Terminated
		Jul 19 11:19:27 192.168.102.2 ZYXEL: board 0 line 0 channel 0, call 1, C01 Outgoing Call dev=2 ch=0
	40002
		Jul 19 11:19:32 192.168.102.2 ZYXEL: board 0 line 0 channel 0, call 1, C02 OutCall Connected 64000
	40002
		Jul 19 11:20:06 192.168.102.2 ZYXEL: board 0 line 0 channel 0, call 1, C02 Call Terminated
			2 - Packet Triggered
		SdcmdSyslogSend (SYSLOG_PKTTRI, SYSLOG_NOTICE, String);
		String = Packet trigger: Protocol=xx Data=xxxxxxxxxx…..x
		Protocol: (1:IP 2:IPX 3:IPXHC 4:BPDU 5:ATALK 6:IPNG)
		Data: We will send forty-eight Hex characters to the server
		Jul 19 11:28:39 192.168.102.2 ZYXEL: Packet Trigger: Protocol=1,
		Data=4500003c100100001f010004c0a86614ca849a7b08004a5c020001006162636465666768696a6b6c6d6e6f70717273
	74

System Maintenance 30-7