ZyXEL Communications 792H manual Spi

Models: 792H

1 428
Download 428 pages 12.67 Kb
Page 199
Image 199

Prestige 792H G.SHDSL Router

The following table describes the labels in this screen.

 

Table 14-9 VPN Manual Key

LABEL

DESCRIPTION

 

 

IPSec Setup

 

 

 

Active

Select this check box to activate this VPN policy.

 

 

Name

Type up to 32 characters to identify this VPN policy. You may use any character,

 

including spaces, but the Prestige drops trailing spaces.

 

 

IPSec Key Mode

Select IKE or Manual from the drop-down list box. Manual is a useful option for

 

troubleshooting if you have problems using IKE key management.

 

 

SPI

Type a number (base 10) from 1 to 999999 for the Security Parameter Index.

 

 

Encapsulation Mode

Select Tunnel mode or Transport mode from the drop-down list box.

 

 

DNS Server (for

If there is a private DNS server that services the VPN, type its IP address here. The

IPSec VPN)

Prestige assigns this additional DNS server to the Prestige's DHCP clients that have

 

IP addresses in this IPSec rule's range of local addresses.

 

A DNS server allows clients on the VPN to find other computers and servers on the

 

VPN by their (private) domain names.

 

 

Local

Local IP addresses must be static and correspond to the remote IPSec router's

 

configured remote IP addresses.

 

Two active SAs can have the same configured local or remote IP address, but not

 

both. You can configure multiple SAs between the same local and remote IP

 

addresses, as long as only one is active at any time.

 

In order to have more than one active rule with the Secure Gateway Address field

 

set to 0.0.0.0, the ranges of the local IP addresses cannot overlap between rules.

 

If you configure an active rule with 0.0.0.0 in the Secure Gateway Address field and

 

the LAN’s full IP address range as the local IP address, then you cannot configure

 

any other active rules with the Secure Gateway Address field set to 0.0.0.0.

 

 

Local Address Type

Use the drop-down menu to choose Single, Range, or Subnet. Select Single for a

 

single IP address. Select Range for a specific range of IP addresses. Select Subnet

 

to specify IP addresses on a network by their subnet mask.

 

 

VPN Screens

14-21

Page 199
Image 199
ZyXEL Communications 792H manual Spi