ZyXEL Communications 792H Then the Rem Login, Rem Password, My Login, My, Based or LLC-based

Prestige 791R G.SHDSL Router

Menu 11.1 - Remote Node Profile

Rem Node Name= myISP	Route= IP
Active= Yes	Bridge= No
Encapsulation= RFC-1483	Edit IP/Bridge= No
Multiplexing= VC-based	Edit ATM Options= No
Incoming:	Telco Option:
Rem Login= N/A
Rem Password= N/A	Allocated Budget(min)= N/A
Outgoing:	Period(hr)= N/A
My Login= N/A	Schedule Sets= N/A
My Password= N/A	Nailed-Up Connection= N/A
Authen= N/A	Session Options:
	Edit Filter Sets= No
	Idle Timeout(sec)= N/A
Press Space Bar to Toggle.	DELETE PROFILE:

Edit IP/Bridge Options in menu 11.3.

Edit ATM Options in menu 11.6.

Edit Filter Sets in menu 11.5.

Figure 24-2 Remote Node Profile

Table 24-1 Remote Node Profile

FIELD		DESCRIPTION	EXAMPLE
Rem Node Name		Type a unique, descriptive name of up to eight	myISP
		characters for this node.
Active		Press [SPACE BAR] and then [ENTER] to select Yes to	Yes
		activate or No to deactivate this node. Inactive nodes
		are displayed with a minus sign “–“ in SMT menu 11.
Encapsulation		PPPoA refers to RFC-2364 (PPP Encapsulation over	ENET ENCAP
		ATM Adaptation Layer 5). PPPoE refers to RFC 2516
		(PPP Encapsulation over Ethernet).
		If RFC-1483(Multiprotocol Encapsulation over ATM
		Adaptation Layer 5) or ENET ENCAP are selected,
		then the Rem Login, Rem Password, My Login, My
		Password and Authen fields are not applicable (N/A).
Multiplexing		Press [SPACE BAR] and then [ENTER] to select the	LLC-based
		method of multiplexing that your ISP uses, either VC-
		based or LLC-based.
Service Name		When using PPPoE encapsulation, type the name of	N/A
		your PPPoE service here.
Incoming:		Type the login name that this remote node will use to
	Rem Login	call your Prestige. The login name and the Rem
		Password will be used to authenticate this node.

Remote Node TCP/IP Configuration 24-3