ZyXEL Communications 792H manual My WAN Addr Sample IP Addresses

Prestige 791R G.SHDSL Router

Table 24-2 Remote Node Network Layer Options

FIELD	DESCRIPTION	EXAMPLE
Private	This determines if the Prestige will include the route to this remote node in	No
	its RIP broadcasts. If set to Yes, this route is kept private and not included
	in RIP broadcast. If No, the route to this remote node will be propagated
	to other hosts through RIP broadcasts.
RIP Direction	Press [SPACE BAR] and then [ENTER] to select the RIP Direction.	None
	Options are Both, In Only, Out Only or None.
Version	Press [SPACE BAR] and then [ENTER] to select the RIP version.	RIP-1
	Options are RIP-1, RIP-2Bor RIP-2M.
Multicast	IGMP-v1sets IGMP to version 1, IGMP-v2sets IGMP to version 2 and	None
	None disables IGMP.
IP Policies	You can apply up to four IP Policy sets (from 12) by typing in their	3, 4, 5, 6
	numbers separated by commas. Configure the filter sets in menu 25 first
	(see the IP Policy Routing chapter) and then apply them here.
Bridge Options
Ethernet Addr	See the chapter on Bridging Setup for information on bridging.
Timeout (min)

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

24.3.1 My WAN Addr Sample IP Addresses

The following diagram explains the sample IP addresses to help you understand the field of My Wan Addr in Menu 11.3. My WAN Addr indicates the local Prestige WAN IP while Rem IP Addr indicates the peer

WAN IP.

Remote Node TCP/IP Configuration 24-7