ZyXEL Communications 792H manual Static Route Setup, Static Route Overview

Prestige 791R G.SHDSL Router

Chapter 25

Static Route Setup

This chapter shows how to setup IP static routes.

25.1 Static Route Overview

Static routes tell the Prestige routing information that it cannot learn automatically through other means. This can arise in cases where RIP is disabled on the LAN or a remote network is beyond the one that is directly connected to a remote node.

Each remote node specifies only the network to which the gateway is directly connected and the Prestige has no knowledge of the networks beyond. For instance, the Prestige knows about network N2 in the following figure through remote node Router 1. However, the Prestige is unable to route a packet to network N3 because it does not know that there is a route through remote node Router 1 (via Router 2). The static routes allow you to tell the Prestige about the networks beyond the remote nodes.

Figure 25-1 Sample Static Routing Topology Configuration

Static Route Setup 25-1