ZyXEL Communications 792H manual Resetting the Time, Time and Date Setting Fields

	Prestige 791R G.SHDSL Router
	Table 32-2 Time and Date Setting Fields
FIELD	DESCRIPTION
Use Time Server	Enter the time service protocol that your time server sends when you turn on the
when Bootup	Prestige. Not all time servers support all protocols, so you may have to check with
	your ISP/network administrator or use trial and error to find a protocol that works.
	The main differences between them are the format.
	Daytime (RFC 867) format is day/month/year/time zone of the server.
	Time (RFC-868)format displays a 4-byte integer giving the total number of
	seconds since 1970/1/1 at 0:0:0.
	NTP (RFC-1305) is similar to Time (RFC-868).
	None. The default, enter the time manually.
Time Server	Enter the IP address or domain name of your time server. Check with your
Address	ISP/network administrator if you are unsure of this information.
Current Time	This field displays an updated time only when you reenter this menu.
New Time	Enter the new time in hour, minute and second format.
Current Date	This field displays an updated date only when you re-enter this menu.
New Date	Enter the new date in year, month and day format.
Time Zone	Press [SPACE BAR] and then [ENTER] to set the time difference between your
	time zone and Greenwich Mean Time (GMT).
Daylight Saving	If you use daylight savings time, then choose Yes.
Start Date	If using daylight savings time, enter the month and day that it starts on.
End Date	If using daylight savings time, enter the month and day that it ends on
Once you have filled in this menu, press [ENTER] at the message “Press ENTER to Confirm or ESC to
Cancel“ to save your configuration, or press [ESC] to cancel.

32.3.1 Resetting the Time

The Prestige resets the time in three instances:

i.On leaving menu 24.10 after making changes.

ii.When the Prestige starts up, if there is a timeserver configured in menu 24.10.

iii.24-hour intervals after starting.

System Maintenance and Information 32-5