ZyXEL Communications 792H manual Global Start/End IPs, Edit, Select Rule item

Prestige 791R G.SHDSL Router

	FIELD	DESRIPTION	EXAMPLE
Set Name		Enter a name for this set of rules. This is a required field. If this field	NAT_SET
		is left blank, the entire set will be deleted.
Action		The default is Edit. Edit means you want to edit a selected rule (see	Edit
		following field). Insert Before means to insert a rule before the rule
		selected. The rules after the selected rule will then be moved down
		by one rule. Delete means to delete the selected rule and then all the
		rules after the selected one will be advanced one rule. None disables
		the Select Rule item.
Select Rule		When you choose Edit, Insert Before or Delete in the previous field	1
		the cursor jumps to this field to allow you to select the rule to apply
		the action in question.

You must press [ENTER] at the bottom of the screen to save the whole set. You must do this again if you make any changes to the set – including deleting a rule. No changes to the set take place until this action is taken.

Selecting Edit in the Action field and then selecting a rule brings up the following menu, Menu 15.1.1.1 - Address Mapping Rule in which you can edit an individual rule and configure the Type, Local and

Global Start/End IPs.

An End IP address must be numerically greater than its corresponding IP Start

address.

NAT 27-7