ZyXEL Communications 792H manual Subnet

Prestige 792H G.SHDSL Router

Table 36-2 Menu 27.1.1 IPSec Setup

FIELD	DESCRIPTION	EXAMPLE
End/Subnet	When the Addr Type field is configured to Single, this field is N/A.	192.168.1.38
Mask	When the Addr Type field is configured to Range, enter the end (static) IP
	address, in a range of computers on the LAN behind your Prestige.
	When the Addr Type field is configured to SUBNET, this is a subnet mask
	on the LAN behind your Prestige.
Port Start	0 is the default and signifies any port. Type a port number from 0 to 65535.	0
	You cannot create a VPN tunnel if you try to connect using a port number
	that does not match this port number or range of port numbers.
	Some of the most common IP ports are: 21, FTP; 53, DNS; 23, Telnet; 80,
	HTTP; 25, SMTP; 110, POP3
End	Enter a port number in this field to define a port range. This port number	N/A
	must be greater than that specified in the previous field. This field is N/A
	when 0 is configured in the Port Start field.
Remote	Remote IP addresses must be static and correspond to the remote IPSec
	router’s configured local IP addresses. The remote fields are N/A when the
	Secure Gateway Address field is configured to 0.0.0.0.
	Two active SAs can have the same configured local or remote IP address,
	but not both. You can configure multiple SAs between the same local and
	remote IP addresses, as long as only one is active at any time.
Addr Type	Press [SPACE BAR] to choose SINGLE, RANGE, or SUBNET and press	SUBNET
	[ENTER]. Select SINGLE with a single IP address. Use RANGE for a
	specific range of IP addresses. Use SUBNET to specify IP addresses on a
	network by their subnet mask.
IP Addr Start	When the Addr Type field is configured to Single, enter a static IP	4.4.4.4
	address on the network behind the remote IPSec router.
	When the Addr Type field is configured to Range, enter the beginning
	(static) IP address, in a range of computers on the network behind the
	remote IPSec router.
	When the Addr Type field is configured to SUBNET, enter a static IP
	address on the network behind the remote IPSec router.
	This field displays N/A when you configure the Secure Gateway Address
	field to 0.0.0.0.

VPN/IPSec Setup 36-9