ZyXEL Communications 792H manual Enter to open Menu 11.3 Network Layer Options, Nat

Prestige 792H G.SHDSL Router

Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press

[ENTER] to open Menu 11.3 - Network Layer Options.

Menu 11.3 - Remote Node Network Layer Options

Rem IP Addr= 0.0.0.0

Rem Subnet Mask= 0.0.0.0

My WAN Addr= 0.0.0.0

NAT = None

Metric= 15

Private= No

RIP Direction= Both

Version= RIP-2B

Multicast= None

Enter here to CONFIRM or ESC to CANCEL:

Figure 21-6 Remote Node Network Layer Options

Table 21-5 Remote Node Network Layer Options

FIELD	DESCRIPTION	EXAMPLE
Rem IP	Leave this field set to 0.0.0.0 to have the ISP or other remote router	0.0.0.0
Address	dynamically (automatically) send its IP address if you do not know it.	(default)
	Enter the remote gateway’s IP address here if you know it (static).
Rem IP	Leave this field set to 0.0.0.0 to have the ISP or other remote router	0.0.0.0
Subnet	dynamically send its subnet mask if you do not know it. Enter the remote	(default)
Mask	gateway’s subnet mask here if you know it (static).
My WAN	Leave the field set to 0.0.0.0 to have the ISP or other remote router	0.0.0.0
Addr	dynamically (automatically) assign your WAN IP address if you do not	(default)
	know it. Enter your WAN IP address here if you know it (static).
	This is the address assigned to your local Prestige, not the remote
	router.
NAT	Press [SPACE BAR] and then [ENTER] to select either Full Feature,	None
	None or SUA Only. See the Network Address Translation (NAT) chapter	(default)
	for a full discussion on this feature.
Metric	Enter a number from 1 to 15 to set this route’s priority among the	15
	Prestige’s routes. The smaller the number, the higher priority the route	(default)
	has.

21-8 Dial Backup